26
SPEKTRUM DX3R USER GUIDE
27
SPEKTRUM DX3R USER GUIDE
to access the trIM steP functIon
In the List screen use the roller to highlight the Trim
Step function.
Press the roller to access the Trim Step function. The
above screen will appear.
Use the roller to select the desired channel that you
wish to adjust the trim step of.
Press the roller to highlight that channel and the
surrounding box will flash then rotate the roller to
adjust the Trim Step value. The adjustment range
is from 1 to 20 (very fine to coarse trim steps). The
default setting is 4.
To return to the main screen press and hold the roller
for more than three seconds.
reset
Model
01: Model 01
Reset
User Name
Parameters
≤
The reset function is used to reset the Model Memory
that is selected and the User Name back to the
factory defaults. The Parameters function is used
to recalibrate the transmitter’s steering and brake
potentiometers.
to access the reset functIon
In the List screen use the roller to highlight the Reset
function.
The above screen will appear.
Rotate the roller to access the desired function that
you choose to reset.
Model:
Reset the model memory that is
displayed
User Name: Reset the user name
Parameters: Recalibrate the transmitter’s steering
and brake potentiometers
Press the roller to access the selected reset function. If
the model was selected use the roller to select the
desired model memory that you wish to reset. Then
press the roller to access the Confirm screen.
Reset
01: Model 01
Confirm
NO
YES
≤
Use the roller to highlight YES; then press the roller
to reset.
To return to the Main screen press and hold the roller
for more than three seconds.
to access the ParaMeters
(recalIbrate) functIon
Model
01: Model 01
Reset
User Name
Parameters
≤
Warning:
If calibration is not properly
completed the radio will not function correctly.
If after calibration the steering or throttle does
not function properly (the travel is reduced or no
servo travel), it will be necessary to recalibrate
the transmitter.
In the List screen use the roller to highlight the
Reset function.
The above screen will appear.
Use the roller to access Parameters.
Press the roller to access the Confirm screen.
Parameters
Reset
Confirm
NO
YES
≤
Use the roller to highlight YES then press the roller to
reset. The following screen will appear.
Warning:
Once YES is selected, you must
complete all the calibration steps described
in this section or the radio will not function
properly.
To return to the main screen press and hold the roller
for more than three seconds.
Cycle
Controls
SAVE
Calibrate
CH1- 2015
CH1 2019
CH1+ 2025
CH2- 2240
CH2 2240
CH2+ 2241
≤
Rotate the steering wheel full right then full left; then
move the throttle trigger to full throttle and full brake.
Note
: The values will change to correlate with
the actual potentiometers.
After the steering and throttle/brakes have been
transitioned throughout their stroke, use the roller
to highlight SAVE and press the roller to save the
calibration settings.
