Horizon Hobby JR 11X Instruction And Programming Manual Download Page 5

Page: 5 / 23

JR 11X • RADIO INSTRUCTION MANUAL

The ACRO mode is for powered fixed-wing aircraft. It contains advanced features
designed to assist the pilot in realizing the full potential of the aircraft. These
features include:

•  Up to 3 flight modes
•  Switch and lever assignability
•  Triple Rates and Exponentials for Aileron, Elevator and Rudder that can be

combined or assigned to flight modes

•  4 programmable Wing Types (Normal, Flaperon, Delta, 4-aileron)
•  Differential with two values per channel (Aileron, Dual Rudder, Dual Flap)
•  V-Tail mixing
•  Dual Channels for All Primary Flight Controls and Flaps
•  Dual Throttles (With Independent Trims and Throttle Curves)
•  Adjustable Trim Rates (10–100 Trim Steps)
•  L.S.T. trim—trim can be programmed to affect endpoints or center point

only

• Elevator-To-Flap mixing
• Aileron-To-Flap mixing

• Balance mixing allows precise mixing of slave channel to master at multiple

points

•  Throttle hold—can be assigned as a kill switch
•  Aileron-To-Rudder mixing
•  Throttle Curves (2)
•  Flap System (With Elevator and Aileron Trim, Auto Land, Elevator/Flap

Delay)

• Gyro System (In-Flight Gain Selection of up to 3 Gains for up to 2 Gyros)
• Servo Speed (Independent in Both Directions – Eliminates Door

Sequencers)

•  6 Programmable Mixes (Includes 3 Multi-Point Mixes)
•  Programmable Trainer System (Selectable Channels for Student Control)
•  Timers- up to four (Stopwatch, Countdown, Integrated)
•  Servo Monitor (Automatically Renames Channels According to

Assignments)

• Pitch Curve Mixing for variable pitch props

AIRPLANE - ACRO MODE

The 11X Heli Mode programming includes 6 swashplate types making it
compatible with virtually every type of model helicopter. Some of the 11X’s
sophisticated Heli programming features include:

•  Switch Assignability for channels and functions
•  Up to six fully programmable Flight Modes
•  Flight Mode Naming allows custom naming of each flight mode.
•  Warning system allows custom programming of alarms for various switch

and stick positions

• Programmable Servo Speed
• Triple Rates/Exponentials (up to 4 Rates/EXPOs for Aileron, Elevator and

Rudder in flight modes)

• 6 Swashplate Types (normal, 2 servo 180, 3 servo 120, 3 servo 140, 3 servo

90, 4 servo 90)

• Electronic 3D Cyclic Ring prevents overdriving the cyclic servos with

combined aileron and elevator commands

•  Adjustable Trim Rates (10 – 100 trim steps)
•  Built-In Cyclic-to-Throttle Mixing for Aileron, Elevator, and Rudder
•  Governor Mix
•  Throttle Curves (up to 5) with up to 7 programmable points
•  Pitch Curves (up to 6) with up to 7 programmable points
•  Gyro System (In Flight mode Gain Selection of up to 6 gains)
•  6 Programmable Mixes (includes 3 multi-point and 3 standard mixes)
•  Programmable trainer system (selectable channels for Student Control)
•  3 programmable timers that can be triggered w/ the throttle position or

programmable switches

• Servo Monitor (automatically renames channels according to assignments)
• Mix Monitor displays all active mixes

HELICOPTER MODE

The 11X GLID programming is optimized for multi-function sailplanes and offers
the highest level of versatility and sophistication. The system has many features
including:

•  Switch Assignability for channels and functions
•  Up to 5 fully programmable Flight Modes
•  Flight Mode Naming allows custom naming of each flight mode
•  Dual control functions for elevator, rudder, flap and spoilers
•  V-tail mixing
•  Stick Position switches allow mixing functions to be turned on/off via a stick

position

• Fully programmable motor function
• Camber programming for each flight mode

• Warning system allows custom programming of alarms for various switch

and stick positions

• Programmable servo speed
• Triple Rates/Exponentials (up to 4 Rates/EXPOs for Aileron, Elevator and

Rudder in flight modes)

•  Adjustable Trim Rates (10–100 Trim Steps)
•  6 Programmable Mixes (includes 3 Multi-Point and 3 Standard mixes)
•  Programmable Trainer system (selectable channels for student control)
•  3 Programmable Timers that can be triggered with the throttle position or

programmable switches

• Servo Monitor (automatically renames channels according to assignments)
• Mix Monitor displays all active mixes

SAILPLANE MODE

TRANSMITTeR IDeNTIFICATION (MODe 2)

Antenna

Gear Switch
flight Mode Switch
Left Trimmer/
Trainer Switch
flap Switch
Elevator D/R

Throttle/Rudder Stick

Throttle Trim
Rudder Trim

Programming buttons

Handle

Mix Switch
Right Slider

Trainer Port