14
15
4. Push the stick full forward (elevator control). When
this is done, the horizontal control surface should move
down (as shown), causing the plane to pitch down.
Down
Mode 1
Mode 2
5. Pull back on the stick (elevator control). When this is
done, the horizontal control surface should move up
(as shown), causing the plane to pitch up.
Up
Mode 1
Mode 2
Step 8
Tail Control Test (continued)
Step 8
Note: Y ou will need to reverse the aileron channel for
the rudder to travel in the correct direction.
Refer to your specific transmitter manual for
information on reversing.
1. Make certain the throttle stick is in the “off” position.
Turn on the transmitter.
2. Install the flight battery in the fuselage and plug the
battery lead into the lead inside the airplane.
3. Move the stick on the transmitter (rudder control) side
to side, observing the vertical control surface moving
per your input, as shown.
Right
Mode 1
Mode 2
Left
Mode 2
Mode 1
Tail Control Test
