30
EN
a
b
c
3. Attach the FPV monitor holder
to the MLP6DSM transmitter.
a.
Slide the holder down over
the antenna.
b.
Tighten the clamp screw.
Do not overtighten.
c.
Open the clamp jaws and
place the monitor in the jaws.
The angle of the monitor can
be adjusted by loosening the
angle adjustment knob, rotat-
ing the clamp up or down and
tightening the adjustment knob.
4. Insert a micro memory card (not included) in the slot on the side of the
video monitor. Press the card in until it locks. To remove the card, press
in slightly and release until the card is released.
Always insert the memory card before powering on the video monitor.
5. Power on the video monitor and look for a clear channel. Clear channels
will have a consistent static background. Channels with interference will
display horizontal static lines. Select one of the clear channels.
6. Once you have chosen a clear channel on the monitor, select the same
channel on the video transmitter.
