16
EN
If you encounter problems binding either the included RTF transmitter
or your computer radio, obey the binding instructions and refer to the
troubleshooting guide for other instructions. If needed, contact the
appropriate Horizon Product Support office.
Your RTF transmitter comes prebound to the quadcopter. If you need to
re-bind, follow the directions below.
MLP6DSM Binding Procedure (RTF)
1. Disconnect the flight battery from the quadcopter.
2. Center all trims on your transmitter.
3. Power off the transmitter and fully lower the throttle.
4. Connect the flight battery in the quadcopter. All of the LEDs on the
aircraft will flash rapidly, indicating the aircraft has entered bind mode.
5. Push in and hold down the left stick while powering on the transmitter
(you will hear a ‘click’ and a long tone).
6. Release the left stick. The transmitter will beep and the power LED
will blink. The quadcopter is bound when all of the LEDs on the
aircraft turn solid.
7. Disconnect the flight battery and power the transmitter off.