12
13
ASSEMBLY STEp 3
A
Open
hardware for step 3
.
B
Attach
lead wire
to bottom end of
console cable
. Pull
lead wire
through
right console mast
. After pulling the
lead wire through the mast, the top of the
console cable
should be located at the
top of the mast.
C
With the
running deck
in the raised
position, attach the
right console
mast
to the
base frame
using 4
bolts
(b)
, 4
spring washers (c)
and 4
flat
washers (d)
.
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
BOLT (B)
20 mm
Qty: 4
SPRING WASHER (C)
15 mm
Qty: 4
FLAT WASHER (D)
15 mm
Qty: 4
HARdWARE fOR STEp 3 :
BOLTS (B)
SPRING WASHERS (C)
FLAT WASHERS (D)
RIGHT CONSOLE MAST
CONSOLE CABLE
LEAD WIRE
BASE FRAME
RUNNING
DECK
ASSEMBLY STEp 4
SPRING WASHER (C)
15 mm
Qty: 4
FLAT WASHER (D)
15 mm
Qty: 4
BOLT (E)
15 mm
Qty: 4
HARdWARE fOR STEp 4 :
BOLTS (E)
CONSOLE MAST
CONSOLE CABLES
WATER BOTTLE POCKETS
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
SPRING WASHERS (C)
FLAT WASHERS (D)
A Disengage the
deck lock latch
with your foot to
lower the
running deck
.
B Open
hardware for step 4
.
C gently place the
console
on top of the
console
masts
. Attach the
left side
first using 2
bolts (e)
, 2
spring washers (c)
and 2
flat
washers (d)
.
D Detach and discard the
lead wire
. Connect the
console cables
and carefully tuck wires in
masts to avoid damage.
E Attach the
right side
of the
console
using 2
bolts (e)
, 2
spring washers (c)
and 2
flat
washers (d)
.
F Insert
water bottle pockets
into
console
.
g Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL gUIDE.
NOTE: Be careful not to pinch any wires
while assembling the console.
YOU ARE FINISHED!
T101_CT53-OM_rev1_0.indd 12-13
2/16/11 8:26 AM
