Horizon Fitness CST 3.5, Service Manual, Page: 9 / 67

9
SPARE
PARTS
REPLACEMENT
TROUBLESHOOTING
ENGINEERING
MODE
WIRING
DIAGRAMS
AND
SCHEMA
TICS
VOL
TAGE
CHECKS
AND
LED
DIAGNOSIS
5-STEP
DIAGNOSTIC
PROCESS
PROPER
HEART
REA
TE
USAGE
MAINTENANCE
RECOMMENDED
TOOLS
SAFETY
INSTRUCTIONS
W
ARRANTY
Aligining the Running Belt
1) If the running belt moves rapidly to one side when performing the next step, press the Stop button
immediately.
• Turn on the treadmill. With the treadmill speed between 6-8 mph, stand behind the treadmill and watch the
movement of the running belt. As you watch the running belt, make sure that the belt runs without moving
from one side to the other and that the belt is centered between the side rails.
) If the running belt is not tracking properly, follow the procedures below:
• If the running belt tracks to the left, turn the left roller bolt clockwise 1⁄4 of a turn, keeping the belt tension
in mind. Over-tightening the running belt may cause damage to the running belt and roller bearings.
• If the running belt tracks to the right, turn the right roller bolt clockwise 1⁄4 of a turn, keeping the belt ten-
sion in mind. Over-tightening the running belt may cause damage to the running belt and roller bearings.
#FMUJTUPPGBSUPUIFMFGUTJEF
#FMUJTUPPGBSUPUIFSJHIUTJEF
Figure 3
Figure 4
MAINTENANCE