50
W
ARRANTY
SAFETY
INSTRUCTIONS
RECOMMENDED
TOOLS
MAINTENANCE
PROPER
HEART
RA
TE
USAGE
5-STEP
DIAGNOSIS
PROCESS
VOL
TAGE
CHECKS
AND
LED
DIAGNOSIS
WIRING
DIAGRAMS
AND
SCHEMA
TICS
ENGINEERING
MODE
TROUBLESHOOTING
SPARE
PARTS
REPLACEMENT
Optical Disk/Digital Sensor/Drive Motor Replacement
Tools Required:
• 13 mm Socket
• Philips Screwdriver
• Right Angle Philips Screwdriver
• 6mm Allen Wrench
Procedure:
1) Remove the motor cover.
)
For Models PST 6 & 8/ 1.2T-5.2T Only
- Remove the screws attaching bottom motor cover to main
frame
3) Put the deck into storage position.
4) Remove the screws from the bottom motor cover. (Figure 39 & 40)
4DSFXT
4DSFXT
#PUUPN.PUPS$PWFS
#PUUPN.PUPS$PWFS
4DSFXT
#PUUPN.PUPS$PWFS
4DSFXT
Figure 39
Figure 40
5)
For Models T61 -T64/CST 3.5 & 4.5/DT650 & 850/WT950 Only
- Bring the deck back
down into the horizontal position.
6)
For Models T61 -T64/CST 3.5 & 4.5/DT650 & 850/WT950 Only
- Plug in and turn on
the machine.
7)
For Models T61 -T64/CST 3.5 & 4.5/DT650 & 850/WT950 Only
- Raise the deck to the
highest elevation and turn off power to the unit.
8)
For Models T61 -T64/CST 3.5 & 4.5/DT650 & 850/WT950 Only
- Remove the remaining
screws from the front of the bottom motor cover.
For Optical Disk Replacement Only-
If you have a right angle Philips screw diver then you
should be able to remove the optical disk after removing the motor cover.
SPARE
PARTS
REPLACEMENT
Summary of Contents for CST 3.5
Page 65: ...65 Notes...