59
SPARE
PARTS
REPLACEMENT
TROUBLESHOOTING
ENGINEERING
MODE
WIRING
DIAGRAMS
AND
SCHEMA
TICS
VOL
TAGE
CHECKS
AND
LED
DIAGNOSIS
5-STEP
DIAGNOSTIC
PROCESS
PROPER
HEART
REA
TE
USAGE
MAINTENANCE
RECOMMENDED
TOOLS
SAFETY
INSTRUCTIONS
W
ARRANTY
6) Fold the treadmill down to the running position and remove the top bolt from the elevation motor, and
remove the motor from the machine. (Figure 69)
Elevation Motor Replacement
Figure 69
7) Reinstall the top bolt to the elevation motor.
1SPQFS;FSP
4IBGU1PTJUJPO
8) Reinstall the bottom bolt to the incline shaft.
Figure 70
When installing the new incline motor; make sure the elevation shaft is flush with the
motor casing (See diagram below). If the position of the shaft is too close to the bottom
motor housing, the shaft may have become jammed. To correct this, remove the bottom bolt from the eleva-
tion motor, press the Start button, let the shaft spin out and then spin the shaft manually so there is almost
one thread visible. (Figure 70)
SPARE
PARTS
REPLACEMENT
Summary of Contents for CST 3.5
Page 65: ...65 Notes...