3 Basic Operation
74
3.6
Sensor information
1.
Press the control unit’s POWER key for about 1 second to turn the power ON.
The "MEASUREMENT" screen appears after about 10 seconds.
Note
The operation keys are designed to operate using the pad of a finger, sharp objects can tear the
control unit cover damaging the operation keys.
2.
Press the left (
) key once to display the "INFORMATION" screen.
The "Sensor Information" screen displays the sensor probe's status.
When the sensor probe is normal, the display below appears.
When there is a sensor probe problem, individual measurement parameters generate
messages such as the one shown below. Follow the troubleshooting information to
remove the problem before continuing to operate the system.
Summary of Contents for U-51
Page 1: ...CODE GZ0000230552H ...
Page 24: ......
