3 Basic Operation
23
4.
Press the down (
) key to move the cursor to "Delete Site", then press the ENTER
key.
A list of the currently saved sites appears. The black circle (
●
) indicates the currently
selected site.
5.
Press the down (
) key to move the cursor to the site to delete, then press the
ENTER key to delete it.
The currently selected site can be deleted after a different site has been selected from the
site selection menu or after all unselected sites have been deleted. The same site name
cannot be registered more than once.
3.2.3
Unit for report
Note
Units can only be selected when the sensor probe is connected.
Follow the steps below to set the measurement units of measurement parameters. No units
are displayed if a measurement parameter has not been selected in the measurement
parameter selection screen (see “ 3.2.4 Sensor selection ” (page 25)).
1.
Press the control unit’s POWER key for about 1 second to turn the power ON.
The "MEASUREMENT" screen appears after about 10 seconds.
Note
The operation keys are designed to operate using the pad of a finger, sharp objects can tear the
control unit cover damaging the operation keys.
2.
Press the right (
) key to switch the display to the "SETTINGS" screen.
Summary of Contents for U-51
Page 1: ...CODE GZ0000230552H ...
Page 24: ......
