3 Basic Operation
70
3.5.2
Deleting data
Follow the steps below to delete all the data stored in memory.
1.
Press the control unit’s POWER key for about 1 second to turn the power ON.
The "MEASUREMENT" screen appears after about 10 seconds.
Note
The operation keys are designed to operate using the pad of a finger, sharp objects can tear the
control unit cover damaging the operation keys.
2.
Press the right (
) key 3 times to display the "DATA OPERATION" screen.
3.
Press the down (
) key to move the cursor to "Delete Data", then press the ENTER
key.
4.
Press the left (
) key to move the cursor to YES, then press the ENTER key.
All the data has been deleted when the indicator appears along with the message "No
data exists".
Summary of Contents for U-51
Page 1: ...CODE GZ0000230552H ...
Page 24: ......
