16
enough to cause fatal damage to the electronic device. For better
lightning protection, please note the following:
1、Confirm that the rack is in good contact with the ground;
2、Make sure the power outlet is in good contact with the
ground;
3、Reasonable wiring to avoid internal induction lightning;
4、When using outdoor wiring, it is recommended to use a
signal
Installation rack requirements
Regardless of whether the switch is installed in a rack or other
horizontal workbench, please note the following:
1、Verify that the rack or table is stable, strong, and capable
of withstanding a weight of at least 5.5 kg;
2、Confirm that the rack itself has a good cooling system, or
keep the room well ventilated;
3、Make sure the rack is well grounded, and the distance
between the power socket and the switch is less than 1.5 meters.
tool preparation
The Phillips screwdriver, electrostatic wrist strap, and cable fiber
may be used during installation.
3.2 The product installation
19 inch standard rack mount
The S5700- 12G- 12F is designed to fit a 19 -inch standard rack
and can be easily mounted to a rack. The specific installation steps
are as follows:
1、 Check the grounding and stability of the rack;
2、 Install the two L -shaped brackets in the accessories on both
sides of the switch panel and fix them with the screws provided in
the accessories.
