13
2.4 device initialization
The switch will automatically initialize after the power is
turned on and the power switch is turned on.
The indicator light will appear as follows:
1、After the power is turned on, the power indicator
remains steady. When SYS enters the flashing state, the
system runs normally.
2、The indicator of each port indicates the
connection status of each port, indicating that the switch
has started to work normally.
Chapter 3 product installation
3.1 Installation precautions:
Note: To avoid damage to the equipment and personal injury
caused by improper use, please observe the following precautions.
Installation safety precautions
power supply remains off during the installation process.
Wear an ESD-preventive wrist strap and ensure that the ESD-
preventive wrist strap is in good contact with the skin to avoid
potential safety hazards.
Switch only can work normally under the correct power
supply. Please confirm that the power supply voltage matches the
voltage indicated by the switch.