Table of Contents
hopf
hopf
Elektronik
version 03.01
page 3
CONTENTS Page
1 Brief Information Model 6038
5
2 Introduction
6
3 Starting
the Radio Clock Circuit Board 6038
6
3.1 Antenna Installation
6
3.2 Coaxial Cable Installation
7
3.3 Reception Frequencies
7
4 Setting by Means of SERVICE. EXE
8
4.1 Time, Date, Status Information and Reception Quality
8
4.2 Initialising the GPS Reception Unit
10
4.2.1 Setting Time and Date
10
4.2.2 Setting the Position Data
11
4.2.3 Setting the Difference Local/UTC
11
4.2.4 Points of Changeover
12
4.2.5 Setting DCF77-Simulation and Sync-bit
12
4.2.6 Time Decoding 3D / Position fix
13
4.3 Hardware Setting Base Address
14
4.4 Setting the Output Mode and DCF77-Simulation
14
4.5 Setting the Parameterbyte for the Serial Interface
16
4.6 Setting the Modebyte for the Serial Interface
16
4.7 Show Points of Changeover, Radio Bit, DCF77-Sim and Evaluation Mode
16
4.8 Activate Reset of the Clock Board
16
5 LED on the Front Panel
17
6 Output pulses
17
7 Files on the Disc
17
8 Error during the Reception Process
18
9 Delivery Condition
19
10 Description of the Front Panel of the Board
20
11 Technical Data
21
