R
EMOTE
S
OFTWARE
6021GPS GPS Satellite Clock - V01.00
23 / 41
hopf
Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
The latitude position is entered first (LT = Latitude) under
P GG°MM
whereby the meanings
are as follows:
P
N or S, North or South
GG
Degrees
of
latitude
from
00 - 90
MM
Minutes
of
latitude
from
00 - 59
The longitude position is then entered (LN = Longitude) under
p GGG°MM
whereby the
meanings are as follows:
p
E or W, East or West
GGG
Degrees
of
longitude
from
000 - 180
MM
Minutes of
longitude
from
00 - 59
The position of
hopf
Elektronik GmbH is given in the above example.
In order to speed up the synchronization of the GPS receiver it is sufficient if the position is
entered to an accuracy of 1-2 degrees.
A
0
should be entered in all places if the position is unknown.
Value range
Value range LT = Latitude / LN = Longitude:
Direction
W = West / E = East
S = South / N = North
Degree of
LT
00 ... 180 –
max. 180°00
Degree of
LN
00 ... 90 –
max. 90°00
Minutes
00 ... 59
3.7.2 Satellites
The information about the available satellites is output in this field.
Value range
Visible
00
GPS receiver has not detected any satellite data yet
01 … xx
Number of satellites theoretically visible at the current time
and position
Tracked
0 ... 12
Number of satellites tracked by the GPS receiver
Satellite Number
01 … xx
Satellite number
S/N Value
0 … 100
Signal / noise ratio (measure of signal quality)
If one or more satellites are permanently displaying values over 90, this may
cause reception failures due to over-modulation of the GPS receiver.
