![background image](http://html1.mh-extra.com/html/hope-industrial-systems/his-um17-e-series/his-um17-e-series_user-manual_2161811011.webp)
Installation Instructions
UM17E User Manual, June 2010
11
Install Cable Exit Cover Plate
Installation instructions vary slightly depending on the Cable Exit Cover Plate you ordered�
Complete installation instructions are shipped with each Cover Plate configuration and may also
be found on our website at the following addresses:
Compression Gland (CP-GL Series):
http://www�HopeIndustrial�com/Installations/99033�pdf
Compression Gland (CP-RG1 Series):
http://www�HopeIndustrial�com/Installations/99071�pdf
Conduit Cable Exit (CP-CON Series):
http://www�HopeIndustrial�com/Installations/99075�pdf
PermaGland (CP-PG Series):
http://www�HopeIndustrial�com/Installations/99076�pdf
Pilot Hole Cover Plate (CP-BLNK Series):
http://www�HopeIndustrial�com/Installations/99077�pdf
Step 3: Install the Monitor
Once you have completed the full bench-test configuration and confirmed that all components are
working properly, you are ready for final installation and mounting of the monitor�
WARNING!
HIS will not assume liability for damage to internal electronics due to improper
installation� Contact HIS if you need additional assistance�
!