4
3
B
C
2
Open tool cover on handle
section (A).
3
8
6
7
A
5
Continued
➜
Attach
hose rack
to
handle
section
by
fitting hooks
(B)
on
rack over slots
(C)
on handle
section.
3
2
A
STEP II Attach rack and handle
4
Align hole on rack with circular
tab on handle.
5
6
While holding rack in place,
slide handle onto cleaner body.
Make sure tab is inserted fully into
slot.
Push bolts into holes on back of
handle.
7
8
Place nuts in recessed areas on
front of handle. Hold each nut
in place while tightening each bolt
securely with a Phillips screw driver.
Press cord into the 3 notches
and the clip as shown.
Reposition bag door by fitting
center tabs on bottom of door
into opening. Press top of door to
snap securely shut.
10
9
9
10
Remove bag door on cleaner
body by pushing down at top of
door and pulling door outward.
Switch (A) above bag door should
be in OFF position.