46
47
C
B
The secondary and
final filters
How to clean
Disconnect cleaner from electrical
outlet.
The
secondary filter (A)
, located
behind the grill in the bottom of
bag compartment, protects the motor
from dirt particles.
If filter becomes dirty, pull off grill and lift
out filter.
Hand wash filter in cold water with mild
detergent, then air dry.
Reposition dry filter and grill.
Should you want to replace this filter, ask
for HOOVER part
No. 38765019.
46
47
45
48
50
49
Pull old bulb straight out of socket.
Push new bulb straight into socket
until locked in place.
Excessive force is not required.
49
Reposition lens and secure with the
two screws.
50
45
A
The
final filter
assists in the
filtration process to return clean air
to the room.
To remove this filter when it becomes
dirty, open the door on the side of the
cleaner.
Lift out filter (B) and hand wash it in cold
water with mild detergent.
Let filter air dry and reposition it on the
side of cleaner. Make sure the green
colored side of filter faces outward. Close
door.
Should you want to replace this filter,
check to see how many colored layers
your filter has and ask for one of the
following:
• 1 layer - HOOVER part
No. 38766011
• 3 layer - HOOVER part
No. 38766009
Do not operate cleaner without either
the secondary or final filter in place.
How to attach filter
door
The filter door is designed with a “break-
away“ feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges (C) of cover with
slots on sides of filter area.
Press door back into place.
The headlight
What to buy
This cleaner uses a 12 volt, wedge base
type 912 bulb, Hoover part
No. 27313-101
.
Disconnect cleaner from electrical
outlet.
How to replace
Using a screwdriver, remove the
two screws as shown and lift off
lens.
48
10