2
GETTING TO KNOW YOUR CLEANER
A. Handle
B. Cord Hook
C. Power Cord
D. Handle Release Button
E. Handheld Carry Handle
F.
Steam Trigger Button
G. Water Tank
H. Floor Head
I.
Water Tank Cap
J.
Steam Control Dial
K. Power Light
L.
Utility Head
M.
Small Cloth
N. Window Squeegee
O. Conic Tool
P. Hose
Q. Round Brush
R.
Metal Brush
S. Comb Brush
T.
De-scaling Tool
U. Water Cup
V. Carpet Glider
W. Textile Pad
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Insert the handle into the cleaner main body until it locks into position.
[1]
2. Assemble the main body of the cleaner to the Floor Head.
[2]
USING YOUR CLEANER
BEFORE YOU BEGIN CLEANING
1.
Make sure Steam Control Dial is set to “OFF” position.
2.
Rotate Water Tank Cap one quarter turn in “Unlock” direction (anti-clockwise)
indicated by illustration on Cap, and remove.
3.
Carefully fill Water Cup with water and pour into Water Tank through the fill hole.
Do not add any chemicals,detergents or perfumes to the clean Water Tank.
[6]
NOTE:
In order to significantly reduce mineral build-up and prolong the life of your steam
mop the use of distilled or de-mineralized water in the unit is highly recommended.
4. Attach a Textile Pad to the base of the Floor Head.
[3]
IMPORTANT: Always unplug the cleaner when adding water or changing a Textile Pad.
NOTE: Wash the Textile Pad prior to use to remove any lint.
STEAM CLEANING HARD FLOORS
NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or
debris.
IMPORTANT: Do not use the cleaner without a Textile Pad attached to the Floor
Head.
NOTE:
Do not use the Carpet Glider when cleaning hard floors.
1. Plug the steam cleaner into the mains power. Turn Steam Control Dial clockwise
from “OFF” to “MAX”, Power light will blink. The desired steam intensity setting
depends on the current steaming task. Rotate the Steam Control Dial for desired
steam intensity.
2. After a few seconds Power Light stops blinking, indicating the cleaner is ready for
use.
3. Recline the cleaner by placing a foot on the Floor Head and lowering the main body
towards the floor.
[8]
4.
Move the cleaner slowly backwards and forwards paying particular attention to high
traffic areas.
REFRESHING CARPETS
NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or debris.
IMPORTANT: Do not use the cleaner without a Textile Pad attached to the Floor Head.
1. Attach the Carpet Glider to the Floor Head.
[4]
2. Plug the steam cleaner into the mains power. Turn Steam Control Dial clockwise
from “OFF” to “MAX”, Power light will blink. The desired steam intensity setting
depends on the current steaming task. Rotate the Steam Control Dial for desired
steam intensity.
3.
After a few seconds Power Light stops blinking, indicating the cleaner is ready for use.
4. Recline the cleaner by placing a foot on the Floor Head and lowering the main body
towards the floor.
[8]
5.
Move the cleaner slowly backwards and forwards paying particular attention to high
traffic areas.
GB
