background image

* Certain Models Only
** May vary according to model

IMPORTANT SAFETY REMINDERS

This Robo.com² vacuum cleaner should only be used for domestic cleaning, as described in this User 
Manual. Please ensure that this User Manual is fully understood before operating the appliance. Please 
keep this User Manual for reference. Use only consumables or spares recommended or supplied by 
Hoover.

WARNING: 

Electricity can be extremely dangerous. This appliance is powered by rechargable Ni-MH batteries and 
is provided with a Charger Base Station. Please ensure the voltage marked on the mains power adapter 
is suitable for connection to standard mains power outlet voltage.

REMINDERS:

• 

Always store the appliance indoors. Do not use outdoors or expose the appliance to the elements, 

humidity or heating sources (oven, fireplace, wet floor).

•  Do not expose the Robo.com² or accessories to excessive heat / cold (Keep between 0-30°C).
• 

Do not drop the Robo.com² or use any accessory if it has been dropped, damaged, left outdoors or 
dropped in water.

• 

Never unplug or pull the mains power adaptor by the power cord.

• 

Never pick up matches, hot ash, cigarette ends, or sharp objects.

•  Do not spray with, or pick up flammable liquids, cleaning fluids, aerosols, or their vapours, as this may 

cause risk of fire/explosion.

• 

Do not continue to use your Robo.com² if it appears to be faulty. If the mains power adaptor power 
cord is damaged, stop using it IMMEDIATELY: to avoid a safety hazard, only an authorised Hoover 
Service engineer must replace the Power Cord.  

•  This Robo.com² is for use on wooden flooring, rubber, ceramic tile, linoleum and short pile carpet.
• 

Do not use to clean stairs.

After Use:

 

Return the Robo.com² to the Charger Base Station. Always switch off and disconnect the mains power 
adaptor before cleaning or attempting any maintenance task. If the Robo.com² will not be used for a long 

time (several weeks), unplug the Charger Base Station according to the instructions in this User Manual. 

Safety with children, the elderly or infirm:

 

This cleaner is not a toy. 
Do not let children play with the appliance or its controls. Please supervise the use of the appliance by 

older children, the elderly or the infirm.

IMPORTANT NOTES BEFORE USE

Please read the following information carefully before using your Robo.com² or its accessories. 
Do not disassemble the Robo.com² and do not attempt to repair it yourself. If a fault occurs, please 
contact the Hoover After Sales Service for professional advice.

Stairs: 

The Robo.com² uses sensors to avoid falling down steps, stairs or over an edge. In 

some situations the sensors can become confused.

The Robo.com² cannot detect steps that are less than 8cm in height.  Steps less than 8cm 
may cause the Robo.com² to fall down.  If available, use the Virtual Barrier* to protect your 
Robo.com² from falling.

Highly reflective or very dark surfaces used on some steps or stairs, such as glass or polished 

ceramics may cause the Robo.com² to fall down. If available use the Virtual Barrier* or place a 
carpet on the lower step to protect your Robo.com² from falling.

Using your Robo.com² on mezzanines, landings or raised areas without borders should be 
avoided. If available use the Virtual Barrier* to prevent your Robo.com² entering these areas.

Battery Use:  

Your Robo.com² is powered by rechargeable, high capacity NiMh batteries.  These 

rechargeable batteries are guaranteed for a period of 6 months if they are maintained and operated 
according to this User Manual.

In the event of a significant drop of the Robo.com² performance, replacement batteries can be obtained 

from your Hoover retailer.

Only use Hoover approved replacement parts for your Robo.com².  Use of parts that are not approved 
by Hoover are dangerous and will invalidate your warranty.

Only use the supplied Charger Base Station and mains power adaptor to recharge your Robo.com².  
Use of the incorrect Charger Base Station or mains power adaptor is dangerous and will invalidate your 
warranty.

robo_com2 IM Australia.indd   1

7/19/2012   4:22:04 PM

Summary of Contents for Robo-com 2



















Reviews: