5
1. VaCuuM asseMBly
A
B
1.2
1.3
1.6
1.7
1.4
1.1
attaCh Main BOdy
Charge Battery
A. Floorhead
B. Main Body
C. Handle
D. Lithium-Ion Battery
E. Battery Charger
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
1.2 Line up floor head with main body and
firmly push together until floor head locks
into place.
attaCh handle
1.3 Insert handle section into main body.
1.4 Secure with screw.
NOTE: Do not overtighten screw.
NOTE: Fully charge
battery before first use.
1.5 Plug charger into
the mains. Push down
firmly. LED indicator will
light within 2 seconds
if inserted properly.
Ensure the initial charge
is 3 hours.
Remove the battery
from charger after fully
charged.
CartOn COntents
C
D
E
1.5
1.6 To remove battery,
pull up release flap while
holding the charger.
1.7 NOTE: Make sure
on/off switch on machine
is set to off.
NOTE: Use only
manufacturer’s supplied
or recommended battery
and charger.
Summary of Contents for HSV87-LX1-ID
Page 22: ...22 7 SERVICE 維修 ...
