Hoover BRUSH N WASH, Instructions Manual

Page: 6 / 43

6
16
ON/OFF pedal &
Handle release pedal
Step on pedal (A) to turn cleaner
on. Step on pedal again to turn
cleaner off.
Step on pedal (B) to lower handle to
operating position. Handle does not lock
into a single position but “floats” to allow
convenient operation.
A
B
To transport
Turn cleaner off before trans-
porting.
To move your cleaner from room to
room, put handle in upright and locked
position, tilt cleaner back on wheels and
push forward.
18
18
17
Automatic “shut off”
When the recovery tank (lower tank)
is full, the automatic shutoff mecha-
nism will shut off the cleaner suction
(suc-
tion will be noticeably reduced).
At that time the red or yellow float disk
will rise to the top of the recovery tank
lid (C). The cleaner will no longer pick
up dirty solution and the
motor sound
will become noticeably higher in
pitch.
When this happens, turn cleaner off
and empty recovery tank
before con-
tinuing use.
Check clean solution tank also; it may
need to be refilled.
C
How to use
The assembled cleaner will look like the drawing.
Cleaner description
16
17
1. Hand grip
2. Solution trigger:
press to
release clean solution.
3. Clean Surge™ button
4. Cord clip:
place cord in
clip to keep it out of the
way when using cleaner
5. Hose
6. Hose holder:
wrap hose
around holder and hooks
for storage.
7. Hose hooks
8. Cord hooks:
wrap cord
around hooks for storage.
The top hook can be rotat-
ed right or left for quick
and easy cord release.
9. Stair/upholstery nozzle
10. Carrying handle
11. Clean solution tank
handle
12. Clean solution tank cap/
measuring cup
13. Clean solution tank:
holds cleaning solution.
14. Recovery tank lid
15. Recovery tank:
holds
dirty solution.
16. Recovery tank front
panel
17. Hood
18. Brush speed selector:
slide selector to set brush
speed on HI, LO, or OFF.
19. Brush Indicator:
spins
when brushes are rotating.
20. Nozzle
21. Solution tube connection
22.Recovery tank latches
23. ON/OFF pedal
24. Handle release pedal:
step on pedal to lower
handle to operating (floor)
position.
This carpet cleaner is intend-
ed for household use.
Operate carpet cleaner only
at voltage specified on data
plate on back of cleaner.
Plug carpet cleaner Into a
properly grounded outlet.
1
3
2
4
5
8
7
7
6
5
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
22
24
15