16.
Maintenance
(continued)
Changing the Motorised Powerhead Drive Belt
WARNING: To reduce the risk of electric shock, ensure that the
power is switched off and the power plug is disconnected from
the power supply before performing any cleaning, maintenance or
troubleshooting checks. Failure to do so may result in electric shock
or personal injury.
CAUTION! The powerhead, hose and rod contains electrical
connections. The powerhead, hose and rod are not serviceable
parts. Please return the product to your nearest Godfreys store if the
powerhead, hose and/or rod are faulty.
Depending on frequency of use, the motorised powerhead drive belt will
occasionally require replacing.
1. Disconnect the powerhead from the telescopic tube.
2. Turn the powerhead upside down and turn the three locking rods
anti-clockwise to unlock the bottom plate.
Cleaning the Motorised Powerhead
The rotating brush must be free of debris for effective cleaning and for maximum suction. Disconnect
the motorised powerhead and turn it over to inspect the rotating brush. If a build-up of debris is wound
around the rotating brush, remove by carefully cutting with scissors. Avoid damaging or cutting the
bristles.
WARNING! Ensure that the cleaner is disconnected from the power supply when performing
any maintenance procedures.
