(INSTALLATION Cont’d.)
Air pressure switch is factory preset to .15” w.c. above the internal static pressure
of the unit (with clean filters). The pressure switch is located in downstream filter
module. Route wiring from hood control panel to the unit using 1/2” conduit through
quick-seal (lower right of filter module). Use existing conduit in the module to route
wires from module exterior to pressure switch (see wiring label above switch). Tight
-
en all conduit fittings. When filters become clogged, the switch will close kitchen
illumination lighting to signal the cleaning or replacement of filters.
AIR PRESSURE SWITCH
Air Pressure Switch
(Within downstream air flow)
Pg. 8
Air Pressure Switch Location
Air Line Routing
710 S. Powerline Road, Deerfield Beach, FL 33442 • 954 570-4083 • 800 322-8730 • www.hooddepot.net
