Shepherd 210A Operation Manual V1.1
©Copyright 2004. Hongda USA Inc.
1
1.1.
Power Off/Time Out –
The lock maximizes both security and
battery life by automatically powering off if no action is taken for 5
to 10 seconds (depending on function), which the user will hear as a
motor noise inside the lock. During the fingerprint registration and
other programming functions, the
time out
function requires you to
move right along in the programming sequence. Dilly-dallying too
long will mean you must start over in the sequence.
1.2.
Manual / Unlocked Operation –
The Shepherd 210 can be set to an
unlocked state so users can open the door without engaging the
fingerprint identification system. (Section
Error! Reference source
not found.
)
1.3.
Security Levels –
Five thresholds are available to optimize between
convenience in operating lock versus stringency of security in
matching fingerprint images. (Section
Error! Reference source not
found.
)
1.4.
Management Levels –
The Shepherd 210 has three permission levels:
Administrator, Supervisor
and
User
. They are designated and
identified by ID numbers that correspond to their stored fingerprints
as follows:
1.4.1.
Administrators:
ID numbers 1 through 5
1.4.2.
Supervisors:
ID numbers 6 through 10
1.4.3.
Users:
ID numbers 11 through 50
1.4.4. In general, the
first two levels
can add/delete fingerprints on
levels below theirs. The
Administrators
can, in addition,
add/delete their own level plus mass-erase all stored fingerprints.
1.4.5.
The first two people Registered will be automatically assigned
Administrator IDs. Thereafter, either of the first two
