Programming Function Blocks and Features
VPR & VRX – User Manual
12/00
170
4.26
Data Storage
Overview
Data Storage lets you store trends, unit data, alarms, events, and diagnostics in separate files on a floppy
disk for later analysis and review (replay). Data can be reviewed onscreen or on a PC with SDA data
analysis software. Setpoint Programs, instrument configurations and calibrations are not part of the Data
Storage feature.
Setup and configuration of Data Storage is described in this section; Online operation is described in
Section 7.4.
Data Storage menu
The Data Storage menu items appear in the following order.
DATA STORAGE
ENABLE STORAGE
REPLAY FROM
DISK
INITIALIZE DISK
LIST DISK FILES
SET UP NEW
SCHEDULES
REVIEW CURRENT
SCHEDULES
FORMAT DISK
BATCH STATE
BATCH NUMBER
DATA STORAGE
STATUS
WARNING LEVEL %
Setup procedure
Data Storage setup is performed Online to avoid interruption of current storage. The steps are described
briefly Table 4-70.
Table 4-70 Data Storage Setup Procedure
Step
Action
1
Access DATA STORAGE Online. Insert a formatted 1.44MB or 120MB disk into the disk drive. If
necessary, format disk using FORMAT DISK (see page 179). See Opening/Closing the Front Bezel
in Section 3.6. Only 1.44MB floppy disks can be formatted on the instrument; 120MB disks must be
formatted on a PC.
2
Select ENABLE STORAGE. See Enable Storage below.
3
Select SET UP NEW SCHEDULES to specify storage data, mode, and other settings. See page
171.
4
Select STORAGE ALLOCATION to specify storage rates. See page 177.
5
Select WARNING LEVEL % to specify the capacity warning level. See page 179.
6
If using a 120MB/Zip disk, preinitialize the disk using DSU software. This will reduce intialization
time (step 7) dramatically from hours to minutes.
7
Select INITIALIZE DISK, then select USE NEW SCHEDULES to initialize the disk with the settings
you created in steps 3 and 4. See page 181.
Enable storage
Set to Enable to turn on storage. If Disabled, no storage will occur, regardless of any other settings.
Summary of Contents for VPR100
