28
TR80 - Installation and Operation Guide
2.11 Controlling Blinds
User can set slat angle, set blind position, toggle between the blinds and switch
between 0% and last set value. The procedure to set the blind control is as follows:
1. Tap in Ready mode, to enter in blind control mode.
The display shows current blind position in the lower display area and the cur
-
rent slat angle in the upper area.
2. Tap
, to set slant angle 10° steps.
3. Long press
, to set blind position by 10° steps.
4. Tap , to exit this mode.
5. Tap to switch the blinds between fully closed & current position.
2.12
DO-NOT-DISTURB / MAKE-UP-ROOM
A hotel guest can activate Do-not-Disturb or Make-up-Room functions by tapping
the DnD/MuR Key. The procedure to switch in DnD / MuR mode is as follows:
1. Tap , to select DnD / MuR / none (depending on the selected configuration).