6. Appendices
008-0738-00
50
TMS 9250 Product User Manual
Rev B
April 2012
© 2012 – Honeywell International Inc. All rights reserved
6.5 APPENDIX E
Power Supply Positioning and Cleaning
This supplement provides information on positioning information on positioning the power
supply and cleaning instructions.
Step
Action
Positioning
the Power
Supply
Place the power supply of the system in a place where you can
easily unplug the power cords.
Cleaning the system
Step
Action
Step1:
Disconnect
Power
Disconnect the power supply from the system. Wait for rotating parts
to come to stand still
Step2:
Clean
Components
Clean the Power supply adapter, SPM, CCM and Rotor with dry
cloth.
ATTENTION:
Do not use any chemicals to clean the system.
Product Grounding
Step
Action
Product
Grounding
•
Shield of all the output signal shall be connected to SPM side (refer
to step 4.c of APPENDIX F) and let floating on data acquisition
side.
•
Third pin of power supply adapter must and shall be connected to
earth.
•
CCM shall be left floating.