Assembling the Terminal Closure Guide
Page 21
Closing the Terminal (Turnstile-Mounted Assembly)
To close a turnstile-mounted terminal, follow these steps:
1. Unscrew the special closure screw by turning it counterclockwise so that
the terminal closure remains fully open (in the direction of the wedge).
2. Insert the upper shell as indicated in Figure 18.
3. Fasten the special closure screw by turning it clockwise and pushing down
on the shell, so that the fitting is completely secure.
4. Tighten the screw.
Figure 18. Closing the Terminal (Turnstile-Mounted Assembly)
