5
Program schedule override (permanent)
Program schedule override (temporary)
1 Press or to adjust the temperature.
2 Once at the desired setpoint temperature,
no further action is needed. The new
setpoint temperature will be held until the
next scheduled time period begins. For more
information on schedule time periods, see
“Program Schedule” on page 4.
3 To cancel the Temporary Hold, Press or
and then press
Cancel
.
1 Press or to adjust the temperature.
2
TEMPORARY HOLD
is displayed and
the setpoint temperature flashes. While
it’s flashing, press
Hold
(Mode) button to
change to Permanent Hold.
3 To cancel the Permanent Hold, press or
and then press
Cancel
.
NOTE:
Depending on which temperature
control mode the thermostat is configured for
(see page 2), you will be adjusting either
air or floor temperature. Floor temperature will
be indicated with
FLR
text above the actual
temperature value. Floor temperature setpoint
is hidden on home screen in this case and will
be displayed again by pressing or .
Hold
