background image

4

Program Schedule

To adjust program schedules

You can program four time periods each day, with different settings for weekdays 

and weekends. We recommend the pre-sets (shown in the table below), since they 

can reduce your heating expenses.

Wake

 - Set to the time you wake up and the 

temperature you want during the morning, until 

you leave for the day.

Away

 - Set to the time you leave home and the 

temperature you want while you are away (usually 

an energy-saving level).

Home

 - Set to the time you return home and the 

temperature you want during the evening, until 

bedtime.

Sleep

 - Set to the time you go to bed and the 

temperature you want overnight (usually an 

energy-saving level).

NOTE: 

To temporarily or permanently override any 

of the above program schedules, see page 5.
Depending on which temperature control mode the thermostat is configured 

for (see page 2), you will be programing either air or floor temperature. Floor 

temperature will be indicated with FLR text above the actual temperature value.

1  Press 

Menu

 on your thermostat.

PROG

 is displayed. Press 

Select

. Then 

ON

 

is displayed. (If you do not want to use a 

schedule, press   or   to display 

OFF

. Press 

Select

.) Press 

Select

3  Press   or   to select day or set of days to 

edit. Press 

Select

.

4  Press   or   to select a schedule period to 

edit (Wake, Away, Home, and Sleep). Press 

Select

ON

 is displayed. Press 

Select

 to keep the 

schedule period on. Or press   and then 

Select

 

to turn off the schedule period. 

6  Time starts blinking. Press   or   to adjust 

the schedule period start time. Press 

Select

7  Temperature starts blinking. Press   or   to 

adjust the “Heat” setpoint temperature. Press 

Select

.

8  Repeat steps 4 through 7 for the remaining 

schedule periods. 

9  Press 

Home

 when you’re finished to save and 

return to the home screen.

10  Schedule can be adjusted and turned 

ON

 or 

OFF

 by returning to 

Menu

 and following the 

steps provided above.

Air 

Temperature

(A mode/

AF mode)

Floor 

Temperature

(F mode)

Wake

(6:00 am)

70

 °

82

 °

Away

(8:00 am)

62

 °

68

 °

Home

(6:00 pm)

70

 °

82

 °

Sleep

(10:00 pm)

62

 °

68

 °

M37076

Summary of Contents for T6 Pro Hydronic













Reviews: