Honeywell STT850 SMARTLINE, User Manual

Page: 60 / 94

Page 50
STT850 Temperature Transmitter User’s Manual
Revision 3
PV Function Block
Mode The Function Block Mode is only displayed for Foundation Fieldbus
transmitters. The eight possible Modes are shown below.
OOS Out Of Service
Auto Automatic
Man Manual
Cas Cascade
RCas Remote Cascade
Rout
Remote Output
IMan Initialization Manual
LO Local Override
Process Variable Tag User Configurable. This field has 14 characters
Engineering Units User Configurable.
This field has 2 characters in case of HART and DE
Note: In case of Fieldbus, this field has 8 characters to configure Custom
Units , which is applicable when Units configured to “Custom” from host)
Temperature
o
C
o
F
o
R
K (Kelvin)
Other:
(%) percent
(mV) millivolt
mA (milliampere)
Custom - applicable to FF only
Bar Graph The limits of the bar graph are user-configurable for each screen.
Trend graph The limits of the trend graph are user-configurable for each screen.
The amount of time visible on the Trend graph is also configurable.
4.1.15 Button operation during monitoring
When the operator screens are active on the Advanced Display, the Increment and Decrement buttons
(

and

) can be used to move to the next or previous operator screen without waiting for the rotation
time to expire. Pressing the Enter button (

) will call up the Main Menu.