Honeywell STT850 SMARTLINE, User Manual

Page: 37 / 94

Revision 3 STT850
Temperature Transmitter User’s Manual
Page 27
Table 8
–
Display Setup Menus
<Return> Return to the Level 1 menu
LCD
Contrast
<Return>
Set Contrast # #
Adjust the LCD contrast level.
Range from 0 to 9.
Default: 5
Press

to
enter menu
selection

and

to
select
number.

to enter
and shift to
next digit
Common
Setup
<Return>
Set Password ####
Enter Display configuration
password. Default: 0000.
This value disables the
password. All other values
enable the password. When
enabled, a prompt to enter the
password is presented only on
the first parameter
successfully accessed to
change after entering the
menu.
Language
English, French,
German, Spanish,
Italian, Turkish,
Russian Select the language for the
Display.
Default: English
Rotation Time # #
Time duration, in seconds, that
each configured screen is
shown before moving to the
next screen.
Range: 3 to 30 seconds
Default: 10 seconds
Screen Rotate
Yes
No
Select to enable or disable the
automatic rotation of Screens
Units °C, °F, °R, K
Select the ranging and
calibration temperature units
Screens
1 through 8
<Return>
Screen
Format
None
Select the Screen format from
the list.
PV
PV & Bar Graph
PV & Trend
Trend Hours ##
Select the amount of historic
data visible on the Trendscreen.
Range: 1 to 999 hours (allows
31 days).
Applies to the “PV & Trend”
format only
PV Selection
(HART/DE
only)
Loop PV
Select the Process Variable
(PV) that will be shown on the
screen. Sensor Resistance is
only available for RTDs and
will read 0 for thermocouples.
Sensor 1
Sensor 2
CJ Temperature
Sensor 1 Resistance
Sensor 2 Resistance
Loop Output
Percent Output