Installation
2.7 Securing the Back Box to a Wall
CAUTION
Before starting installation, make sure that the system controller or
external power source is switched off
1. There are four screw positions in the
rear of the back box for mounting
purposes. Punch the required screw
positions or drill using a 4 mm drill.
2. Secure the back box in its mounting
position with suitable fixings
appropriate to the mounting surface.
Do not over-tighten.
3. There are four cable entry knock-outs
on three sides of and on the rear face
of the back box. Drill or punch the
entries as required.
2.8 Cable Connections
1. Fit suitable cable glands appropriate
to the application and type of cable
being utilized to the opened cable
entries.
21
