2
3
ENGLISH (GB)
IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions before
starting to use the appliance. Keep this manual
in a safe place for future reference.
These instructions are also available on our
website. Please visit www.hot-europe.com.
• This appliance must only be operated as
instructed in this user manual.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
• Do not touch the rotating fan blades with
any part of the body. This can cause personal
injury and damage.
• Clean the appliance regularly by following the
“Cleaning Instructions”.
• This appliance is only designed for indoor use.
• Unwind the power cord completely. Failure to
do so could cause overheating and possible
fire hazard.
• Do not tug at the power cord to disconnect the
plug. Do not touch the power cord with wet
hands. Do not remove the power plug from the
power socket while the product is in use.
• Do not use accessories, spare parts or
components not expected and / or provided
by the manufacturer.
• Always switch the appliance off and
disconnect the power plug from the power
socket when the appliance is not in use or
during transport.
• Do not use this appliance if it is damaged or
shows any signs of possible damage or if it
is not functioning properly. Disconnect the
power plug from the power socket.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
• Never touch the unit with wet hands.
COMPONENTS
(See page 1)
1. Base
2. Pole base cover
3. Metal fan pole
4. Height adjustment locking nut
5. Metal pole extension
6. Power cord
7. Locking screw
8. Control panel
9. Motor assembly
10. Oscillating control knob
11. Carrying handle
12. Rear grille
13. Rear grille locking nut
14. Fan blade
15. Blade locking nut
16. Front grille
17. 3 Base assembly screws
CONTROL PANEL
I. ON/OFF power button
II. Speed control button
III. Timer button
REMOTE CONTROL
IV. ON/OFF power button
V. Speed control button
VI. Timer button
ASSEMBLY INSTRUCTIONS
(See page 2)
A. BASE ASSEMBLY
• Place Base on a flat surface.
• Align 3 screw holes on the bottom pole (3) with the 3 base
holes (Fig. 1).
• Insert 3 screws (17) and tighten by hand.
• Slide pole base cover (2) over metal Fan Pole (3). Turn until
cover locks into place (Fig. 2).
B. FAN HEIGHT ADJUSTMENT
• Loosen locking nut (4) and raise Metal Pole extension (5) to the
desired height and tighten nut (Fig. 3).
Fig. 1
Fig. 2
17
1
1
3
3
2
Fig. 8
Fig. 9
Fig. 5
13
9
Fig. 11
Fig.10
Fig. 6
12
13
Fig. 3
5
4
3
Fig. 4
7
8
5
ASSEMBLY INSTRUCTIONS
OSCILLATION OPERATION
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
Fig. 7
15
14
HS1655E
