manualshive.com logo in svg

Honeywell PX940, User Manual, Page: 43 / 114

Share
Download
Honeywell PX940 User Manual Download Page 43

PX940 User Guide

29

Printer Drivers

Before you can use the printer with Microsoft® Windows® printing applications, 
you must install printer driver software on the PC. Drivers enable the printer to 
communicate with your PC and with printer software applications.

You can access the Honeywell Technical Support Downloads portal at:                

https://hsmftp.honeywell.com

. Click on 

Software > Printers > Printer Software 

and Drivers

) 

Note:

Although Windows may auto-detect the printer when you connect it to a PC through 
a USB port, you still need to install printer drivers on the PC for the printer to operate 
correctly.

Install Honeywell Windows Driver

Use InterDriver to install printer driver software on your PC. 

Note:

Although Windows may auto-detect the printer when you connect it to a PC through 
a USB port, you must still install printer drivers on the PC for correct printer operation.

1.

Access the Honeywell Technical Support Downloads portal at 

https://

hsmftp.honeywell.com

.

2.

Download Honeywell Software Download Manager by clicking 

here

 in the web 

page. Install the Download Manager.

3.

Click on the 

(+)

 to expand the list. Then go to 

Software

 > 

Printers

 > 

Printer

 

Drivers

 > 

Honeywell Windows Driver

. 

4.

Open the Honeywell Software Download Manager and follow the instructions 
to download the file.

5.

Extract the driver files to a location on your PC.

6.

Double-click the.exe file to install InterDriver and follow the prompts to 
complete the installation.

USB Host Port

Use the USB host interface port on the printer to connect these peripheral devices:

Device

Description

Keyboard

Use a standard USB keyboard to send Fingerprint printer language commands 
directly to the printer or to enter information if you are running a Smart Printing 
application.

Barcode scanner

Use USB barcode scanners for data input with a Smart Printing application. The 
printer also supports other USB scanners that use a generic keyboard driver.

Summary of Contents for PX940



















































































































Reviews:

No comments