Honeywell PRO-2200, Installation Manual, Page: 10 / 23

PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2
11
Installation Guide
7. The remainder of the panels can be manually wired for power and RS-485
communications using 18 AWG wire. The wires will be daisy-chained from one panel
to the next so the power and the communications are wired in parallel. PRO22DCC is
available as an option to be purchased with the equipment. This will reduce wiring time
in the field since the power and RS-485 communications between panels is factory-
wired in a harness that plugs into the bottom two connectors on each panel. The only
field wiring required is the two wiring connections of the red and black 12 VDC cables
connecting the PRO22DCC and the PRO22E1PS power supply.
Installation Diagram
PRO22ENC1
PRO22ENC2
(0,051)
(0,045)
(0,045)
(0,032)
(0,076)
(0,229)
(0,196)
(0,035)
(0,098)
(0,330)
(0,203) (0,203)
(0,353)
(0,307)
(0,307)
(0,230)
(0,406)
(0,432)
(0,025)
(0,042)
(0,051)
(0,025)
(0,025)
(0,051)
(0,045)
(0,045)
(0,032)
(0,076)
(0,229)
(0,196)
(0,035)
(0,098)
(0,330)
(0,203) (0,203)
(0,353)
(0,307)
(0,307)
(0,230)
(0,406)
(0,432)
(0,480)
(0,025)
(0,042)
(0,051)
(0,025)
(0,025)