manualshive.com logo in svg

Honeywell PD45, User Manual, Page: 60 / 94

Share
Download
Honeywell PD45 User Manual Download Page 60

50

PD45 User Guide

3.

Turn the printer on while pressing and holding the 

Feed

 button.

4.

Release the Feed button when the status bar is nearly full.

5.

All the settings are restored on the printer.

6.

Turn the printhead lift lever clockwise to lower the printhead and close the 
media cover.

Upgrade the Printer Firmware

Check for periodic updates to the printer firmware. The latest version of the firm-
ware is available from the Honeywell Technical Support Downloads portal 
(

https://hsmftp.honeywell.com

). Go to 

Software > Printers > Industrial, 

select 

your printer, then click 

Current > Firmware

.

Note:

After you upgrade the printer firmware, restore the default settings and calibrate the 
media sensors.

Upgrade Firmware from a USB Storage Device

Place the upgrade file in the root directory on the USB storage device.

Note:

For best results, use a USB storage device that contains no other files besides the 
upgrade file.

1.

Copy the firmware upgrade file to the root directory of the USB storage device.

2.

Turn the printer off.

3.

Insert the USB storage device into a USB host port.

4.

Restart your printer. An upgrading firmware message appears as the upgrade 
file is loaded into the printer memory. This process may take a few minutes.

5.

Remove the USB storage device.

Summary of Contents for PD45































































































Reviews:

No comments