manualshive.com logo in svg

Honeywell PD45, User Manual, Page: 37 / 94

Share
Download
Honeywell PD45 User Manual Download Page 37

CHAPTER

3

 PD45 User Guide

27

CONNECT THE PRINTER

This section contains information about connecting the printer to a PC or to a net-
work. Use the 

From the Printer Web Page

 or the Main Menu to configure settings.

Connect the Printer to Your PC

You can connect the printer to your PC using one of the following methods.

Connect the Printer Using a Serial Cable

You can use a serial connection to communicate with your PC and send commands 
directly to the printer through a terminal connection.

1.

Connect one end of the DB9 to DB9 RS-232 cable to the back of your printer 
and connect the other end to a serial COM port on your PC.

Connect the Printer Using a USB Cable

Connect only one printer to your PC, either directly or through a hub. You do not 
need to set up any parameters for USB communications.

1.

Download and install the InterDriver software on your PC (see 

Install 

Honeywell Windows Driver

).

2.

When prompted, connect one end of the USB Type A cable to the back of the 
printer and connect the other end to your PC.

Connect the Printer to Your Network

These network interfaces provide features such as security, FTP/SFTP server, web 
page, and Alert handling.

Caution:  Read and review the warnings in this manual carefully before 

connecting the printer.

Summary of Contents for PD45































































































Reviews:

No comments