Honeywell PC42T User Manual Download

Page: 3 / 73

PC42t Desktop Printer User Guide

iii

Customer Support

Technical Assistance

To search our knowledge base for a solution or to log in to the
Technical Support portal and report a problem, go to

www.hsmcontactsupport.com

For our latest contact information, see

www.honeywellaidc.com/locations

Product Service and Repair

Honeywell International Inc. provides service for all of its
products through service centers throughout the world. To
obtain warranty or non-warranty service, return your product
to Honeywell (postage paid) with a copy of the dated pur-
chase record. To learn more, go to www.honeywellaidc.com
and select

Service & Repair

at the bottom of the page.

Limited Warranty

For warranty information, go to

www.honeywellaidc.com

and

click

Get Resources

Product Warranty.

Warning: Moving parts are exposed when the cover is open. Make
sure the cover is closed before you operate the printer.

Warning: The printhead/motor may be hot. Allow the printhead/
motor to cool.

Warning: Do not put your fingers inside the print mechanism when
the power is on.

Warning: The tear bar contains sharp edges. Keep fingers and
other body parts away from the tear bar.

V10 CONSUMIBLES S.L.

Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309

Summary of Contents for PC42T










































































Search results

Summary of Contents for PC42T

Reviews:

Related manuals for PC42T

Brands by name

Popular brands

Honeywell PC42T, User Manual

Search results

Summary of Contents for PC42T

Reviews:

Related manuals for PC42T

Brands by name

Popular brands