NFS2-640/E Programming Manual —
P/N 52742:L2 7/17/14
45
Basic Program
Programming
ACS Selection Group T (SLC #1, Detectors 47-78):
ACS Selection Group U (SLC #2, Detectors 47-78):
Table 2.31 ACS Group T
Point
Type
Red LED
Yellow LED
Switch Function*
1
Input
Detector 047 Alarm
Detector 047 Trouble
Not Used
2
Input
Detector 047 trouble
Maintenance Urgent
Detector 047 Trouble
Maintenance Alert
Not Used
3
Input
Detector 048 Alarm
Detector 048 Trouble
Not Used
4
Input
Detector 048 Trouble
Maintenance Urgent
Detector 048 Trouble
Maintenance Alert
Not Used
to
to (see note 1)
to (see note 1)
63
Input
Detector 078 Alarm
Detector 078 Trouble
Not Used
64
Input
Detector 078 Trouble
Maintenance Urgent
Detector 078 Trouble
Maintenance Alert
Not Used
* Pressing the switch button when the Switch Function is “Not Used” will cause the associated LED to
stop blinking. This is a local acknowledgement at the annunciator only: no message is sent to the panel.
NOTE:
1. Point number to Detector number relationship is sequential in groups of 2. Since each detector
occupies 2 points, to determine the Point to Detector relationship, start with detector 47 and count
by 2 starting from point 1.
2. This group is only available when UDACT setting is programmed as option 2 and will
automatically be assigned to ACS address 28.
Table 2.32 ACS Group U
Point
Type
Red LED
Yellow LED
Switch Function*
1
Input
Detector 047 Alarm
Detector 047 Trouble
Not Used
2
Input
Detector 047 Trouble
Maintenance Urgent
Detector 047 Trouble
Maintenance Alert
Not Used
3
Input
Detector 048 Alarm
Detector 048 Trouble
Not Used
4
Input
Detector 048 Trouble
Maintenance Urgent
Detector 048 Trouble
Maintenance Alert
Not Used
to
to (see note 1)
to (see note 1)
63
Input
Detector 078 Alarm
Detector 078 Trouble
Not Used
64
Input
Detector 078 Trouble
Maintenance Urgent
Detector 078 Trouble
Maintenance Alert
Not Used
* Pressing the switch button when the Switch Function is “Not Used” will cause the associated LED to
stop blinking. This is a local acknowledgement at the annunciator only: no message is sent to the panel.
NOTE:
1. Point number to Detector number relationship is sequential in groups of 2. Since each detector
occupies 2 points, to determine the Point to Detector relationship, start with detector 47 and count
by 2 starting from point 1.
2. This group is only available when UDACT setting is programmed as option 2 and will
automatically be assigned to ACS address 29.