manualshive.com logo in svg

Honeywell Notifier 020-558, Manual, Page: 134 / 147

Share
Download
Honeywell Notifier 020-558 Manual Download Page 134

ID3000/ID2000 Fire Panel Configuration Tool Manual

Historic Log

A1 - 1

997-291, Version 3.05

November 2010

Initiation

Start the Tool from the desktop icon or from the
Start Menu (path shown above). The Set
Connection for Historic Data Log window is
displayed, with the current communications
details:

1

If necessary, select ‘Change’, then edit the
settings as described in 

Section 1.5.8

.

2

Either:

i

Connect to the panel, OR

ii

Remain disconnected.

In both cases the Historic and Data Log window
is displayed (see next page).

1

2(i)

2(ii)

Appendix 1: Historic & Data Log Tool

The Historic & Data Log Tool allows the following:

a. Extraction of the panel’s historic event log.

b. Initiation of a data log for a specific sensor.

c. Extraction of a data log for a specific sensor

from the panel. This log is either initiated in
(b) above, or is configured via the panel’s
Log/Display/Print menu.

d. Extraction of the panel’s current analogue

values for all sensors and modules.

e. Extraction of the panel’s software version

number.

Summary of Contents for Notifier 020-558




















































































































































Reviews:

No comments