Honeywell NEXPTZ4520HD-NET Operation Manual Download

Page: 27 / 36

***PTZ/Function/PTZ Limit

Description

①

Max Elevation

Choose the tilt angle limit from the drop down list. For HDZ302DE, it supports -20

to 10

. For

HDZ302D and HDZ302DIN, it supports 0

to 10

②

Enable

Click to enable the PTZ limit function. The Up and Down lines must both be set before enabling
PTZ Limit.

③

Up Line/Down Line

Manually set the PTZ limit Up and Down lines before enabling the function. Use the PTZ
controls to move to the desired position and press

Setup

to set that Up/Down line limit. Check

the Enable box when both Up and Down lines are set. When enabled, clicking

Live

will move

the camera to the set Up/Down line position.

***PTZ/Function/Time task

Description

④

Enable

Check the box to enable the time task function.

⑤

Time Task No.

Select time task No. to set. (1 to 4)

⑥

Time Task Action

Here you can set preset, auto scan, pattern, or tour to perform.

⑦

Auto Home

Set auto home function time to go to the home position after performing the action and the
set amount of time.

⑧

Period Setting

Setup the schedule to start the time task.

***PTZ/Function/PTZ restart

Description

⑨

PTZ restart

Reboot the PTZ.

***PTZ/Function/Default

Description

⑩

Default

Restore PTZ factory default setup.

ENG

3.4.5 PTZ / Function

***

Fixed-basis cameras do not support Rotation (PTZ function)

Summary of Contents for NEXPTZ4520HD-NET





































Search results

Summary of Contents for NEXPTZ4520HD-NET

Reviews:

Related manuals for NEXPTZ4520HD-NET

Brands by name

Popular brands

Honeywell NEXPTZ4520HD-NET, Operation Manual

Search results

Summary of Contents for NEXPTZ4520HD-NET

Reviews:

Related manuals for NEXPTZ4520HD-NET

Brands by name

Popular brands