Honeywell MX8 Reference Manual Download Page 128

Page: 128 / 318

Alarms

To set an alarm:

1. Tap the checkbox to enable the alarm.

2. Tap <Description> and enter a description. The description is limited to 63 characters.

3. Tap the day (or days) to play the alarm.

4. Tap the time to set the time to play the alarm. Set the time and tap ok to return to the Alarms panel.

5. Tap the Bell icon to set the notification. Notifications may include sound, light flash (the Alpha LED flashes) and

vibration. Set the desired options and tap ok to return to the Alarms panel.

6. Tap ok when finished to dismiss the Alarms panel.

4-90

Summary of Contents for MX8































































































































































































































































































































Search results

Summary of Contents for MX8

Reviews:

Related manuals for MX8

Brands by name

Popular brands

Honeywell MX8, Reference Manual

Search results

Summary of Contents for MX8

Reviews:

Related manuals for MX8

Brands by name

Popular brands