Honeywell MS9544, Manual

Page: 40 / 101

33
S
CANNER
O
PERATION
H
OST
S
CANNER
C
OMMANDS
³ 1 1 8 0 1 5
Enable D/E Disable Command. - The scanner will
disable scanning after it receives an ASCII “D” from
the host device. It will enable scanning when it
receives an ASCII “E”.
³ 1 1 8 0 0 5
* Disable D/E Disable.
³ 1 1 8 2 1 1
Enable Z/R Type D/E Simulation - The scanner
will disable scanning after it receives an ASCII “Z”
from the host device. It will enable scanning when it
receives an ASCII “R”.
³ 1 1 8 2 0 1
* No Z/R Type D/E Simulation
³ 1 1 8 0 1 4
Enable F/L Laser Command - The scanner will
turn off the laser after the scanner receives an
ASCII “F” character. The laser will turn on after it
receives an ASCII “L” character.
³ 1 1 8 0 0 4
* Disable F/L Laser Command
³ 1 1 8 1 1 5
Use DTR Scan Disable - The scanner will monitor
the DTR input to determine if scanning should be
allowed. A +12V “active” level enables decoding.
A -12V “inactive” level disables decoding.
³ 1 1 8 1 0 5
* Do Not Use DTR Scan Disable - Do not monitor
the DTR input.
³ 1 1 8 1 1 0
Activate DC2 Character - Scanning will be initiated
with the receipt of a DC2 character (^R, 124).
³ 1 1 8 1 0 0
* Do Not Activate on DC2 Character
³ 1 1 5 9 1 7
Transmit “METROLOGIC” with receipt of an “I”
(49H) via RS232
³ 1 1 5 9 0 7
* Don’t Transmit “METROLOGIC” with receipt of
an “I” (49H) via RS232