manualshive.com logo in svg

Honeywell MK VI, Pilot'S Manual, Page: 6 / 60

Share
Download
Honeywell MK VI Pilot'S Manual Download Page 6

 

060-4314-000 • Rev. C - May 2004

6

 

MK VI & MK VIII EGPWS Pilot Guide

Physical 
Description 

•  Similar to the TCF feature, a

 Runway Field Clearance Floor 

(RFCF) 

feature provides alerting to the pilot of possible 

premature descent based on the aircraft’s GPS position and 
height above the destination runway using Geometric Alti-
tude.  This provides improved protection at locations where 
the destination runway is significantly higher than the sur-
rounding terrain.

• 

Geometric Altitude

, based on GPS altitude, is a computed 

pseudo-barometric altitude designed to reduce or elimi-
nate altitude errors resulting from temperature extremes, 
non-standard pressure altitude conditions, flight in QFE en-
vironment, and altimeter miss-sets.  This ensures an optimal 
EGPWS alerting and display capability.

Some features are optional and may not be active in a given in-
stallation.  For specific effectivity, refer to an applicable Airplane 
Flight Manual (AFM) or EGPWS Airplane Flight Manual Supple-
ment (AFMS).
The MK VI/MK VIII EGPWS is packaged in a non-ARINC rack 
mounted enclosure weighing less than 4 lbs.  No special vibration 
isolation or forced air-cooling is required.
Only 28 VDC versions of the EGPWS are available.  Units are avail-
able with an internal GPS receiver for required GPS data when 
another GPS source is not available.
For more detailed information, contact Honeywell.

Summary of Contents for MK VI





























































Reviews:

No comments