manualshive.com logo in svg

Honeywell MK VI, Pilot'S Manual, Page: 28 / 60

Share
Download
Honeywell MK VI Pilot'S Manual Download Page 28

 

060-4314-000 • Rev. C - May 2004

28

 

MK VI & MK VIII EGPWS Pilot Guide

Runway 
Field
Clearance 
Floor

RFCF Alert Envelope

Runway selection logic incorporates comprehensive aircraft posi-
tion and navigation information to evaluate proximity runways 
and determine the most likely destination runway for all alerting 
purposes.
A

 Runway Field Clearance Floor 

feature is similar to the TCF 

feature except that RFCF is based on the current aircraft posi-
tion and height above the destination runway, using Geometric 
Altitude (in lieu of Radio Altitude).  This provides improved pro-
tection at locations where the runway is significantly higher than 
the surrounding terrain as illustrated below. With version -022 
and later models, the inner limit of the RFCF envelope is moved 
from 1 nm to 1/2 nm of runway end, if runway and position data 
is of high integrity.

Terrain 
Clearance 
Floor

Continued

TCF and RFCF alerts result in illumination of the EGPWS alert 
lights and the aural message 

“TOO LOW TERRAIN”

.  The audio 

message is provided once when initial envelope penetration oc-
curs and again only for additional 20% decreases in Radio or 
Geometric Altitude.  The EGPWS alert lights remain on until the 
TCF/RFCF envelope is exited.

Summary of Contents for MK VI





























































Reviews:

No comments