manualshive.com logo in svg

Honeywell MK VI, Pilot'S Manual, Page: 48 / 60

Share
Download
Honeywell MK VI Pilot'S Manual Download Page 48

 

060-4314-000 • Rev. C - May 2004

48

 

MK VI & MK VIII EGPWS Pilot Guide

System  
Activation

System  
Constraints

Continued

•  The EGPWS terrain/obstacle database includes cataloged hu-

man-made obstructions greater than 100 feet high within 
North America, and portions of Europe and portions of Asia 
(expanding as data is obtained).  The database is not  all-in-
clusive and newer, smaller, or unknown obstructions could 
be encountered. 

Refer to an appropriate AFM or EGPWS AFMS for specific system 
limitations and procedures.
The EGPWS is fully active when the following systems are powered 
and functioning normally:
•  EGPWS
•  Radio Altimeter
•  Air Data
•  ILS or Glideslope Receiver
•  AHRS, IRS, VG, DG (Attitude & Heading)
•  GPS (position)
•  Landing gear
•  Landing flaps
•  Weather Radar Indicator, EFIS, or a dedicated terrain display 

(if terrain/obstacle display enabled)

In the event that required data for a particular function is not 
available, then that function is automatically inhibited and an-
nunciated (e.g. if position data is not available or determined 
unacceptable, TAD and TCF is inhibited, any active terrain display 
is removed, and “TERR INOP”, “TERR UNAVAIL” (or equivalent) 
is indicated). 
EGPWS status annunciations are provided for GPWS inoperative 
(mode 1-6 functions), and Terrain inoperative (TAD/TCF func-
tions). 

Summary of Contents for MK VI





























































Reviews:

No comments