manualshive.com logo in svg

Honeywell MK VI, Pilot'S Manual, Page: 44 / 60

Share
Download
Honeywell MK VI Pilot'S Manual Download Page 44

 

060-4314-000 • Rev. C - May 2004

44

 

MK VI & MK VIII EGPWS Pilot Guide

Options

continued

• 

TAD Alternate Pop Up

 – If TRUE, disables automatic terrain 

display when TAD or Obstacle alert is active.

• 

Smart “500” Callout 

– Available in certain Altitude Callout 

options for “Five Hundred” called out at 500 feet Radio Alti-
tude during non-precision approaches. 

• 

Bank Angle Enable

 – Enables Bank Angle alerts.

• 

Audio Voice Menu

 – Selects the voice (phrase) that is used 

for audio alerts.

• 

Peaks Enable

 – Enables Peaks display mode with elevation 

numbers and alternate density pattern.

• 

Steep Approach Enable

 – Enables Steep Approach (Mode 1 

Excessive Descent Rate) alert biasing.

• 

Flap Reversal

 – Reverses landing flap input discrete logic.

• 

GPS Altitude Reference

 – Defines the GPS Altitude input as 

referenced to WGS-84 or MSL.

• 

Lamp Format

 – One of two lamp formats are available.

Lamp Format 1 specifies only Mode 5 glideslope alerts 
activate the caution (amber) lamp output.  All other alerts 
activate the warning (red) lamp output
 Lamp Format 2 specifies all "Pull-Up" warning alerts ac-
tivate the warning (red) lamp output.  All caution alerts 
activate the caution (amber) lamp output (FAA requirement 
for new installations)

NOTE: Mode 6 advisories do not activate any lamp output.
 
Additional input/output discretes are used to control or define 
EGPWS operations:
• 

Glideslope Inhibit

 – Inhibits Mode 5 Glideslope alerting.  

Normally used for backcourse approaches.

• 

Mode 6 Low Volume

 – Selects reduced Mode 6 volume  

(-6db).  This is sometimes connected to a Windshield Wiper 
system to increase EGPWS audio while wipers are operating

• 

Audio Inhibit

 – disables all EGPWS audio outputs.

• 

Steep Approach Select

 – Selects (activates) Steep Approach 

(Mode 1 Excessive Descent Rate) alert biasing to reduce nui-
sance alerts when Steep Approach Enable is true.

Summary of Contents for MK VI





























































Reviews:

No comments